●V = 22.5 to 63 cm3/rev
●Nominal pressure 280 bar
●Using plain bearings, suitable for heavy-duty applications
●Pipe oil port: connecting flange
●Can realize the combination of multiple pumps
●Multiple configuration variants available
Rexroth Kovèti pou ponp AZPG ekstèn Kovèti pou ponp
This external gear pump mainly consists of a pair of gears supported on bearing bushings or bearings (depending on the series), and a pump casing with front and rear covers. The drive shaft protrudes from the front cover of the pump and is sealed by a shaft seal. These supporting forces on the bearing are absorbed by the special sliding bearing; because the sliding bearing has sufficient elasticity, it forms a surface contact instead of a line contact. Thanks to this, excellent wear resistance of the pump is also ensured - especially at low speeds. The pair of gears has 12 teeth each, which keeps the gear pump with minimal flow pulsation and noise.
Se sele entèn reyalize pa fòs konpansasyon ki pwopòsyonèl ak presyon pwodiksyon an. Avèk konpansasyon sa a, pi bon efikasite asire. Avèk konpansasyon sa a, pi bon efikasite asire. Lè w antre presyon k ap travay nan dèyè kousin lan, yo ka kontwole zòn sele ant dan angrenaj yo ak kote yo pote a. Fok espesyal sa yo fòme fwontyè zòn sa a. Pou sa yo clearances radial nan tèt la nan dan yo Kovèti pou, sele se reyalize pa fòs yo entèn pouse angrenaj yo kont bwat ponp lan.
